Poe Port (Ethernet/Power); Ethernet Ports (Eth 1 & Eth 2); Table 8: Features - Pinout For Eth Ports; Table 9: Features - Eth Port Leds - Redline Connect Series Installation Manuallines

CONNECT-OWS
The following table lists the pinout for the Ethernet ports.
Pin
1, 2
3, 6
4, 5
7, 8
Pin
LINK ACT
100

PoE Port (Ethernet/Power)

The Ethernet port (RJ-45 / F connector) conducts DC power and provides Ethernet
connectivity with the Connect-OW wireless terminal. The Ethernet port connects to the
PoE adapter using a weatherproof CAT-5e Ethernet cable.
Ethernet Ports (ETH 1 & ETH 2)
The ETH 1 and ETH 2 ports (RJ-45 socket) are 10/100Base-T Ethernet interface ports.

Figure 7: Description - Connect-OWS ETH 1 and ETH 2 Port Pin Assignment

The following table lists the pinout for the PoE and Ethernet ports.
Pin
1, 2
3, 6
4, 5
7, 8
Pin
LINK ACT
100
70-00200-02-00
Installation Guidelines

Table 8: Features - Pinout for ETH Ports

Table 9: Features - ETH Port LEDs

On
Blink
Off
On
Off

Table 10: Features - Pinout for PoE and ETH Ports

Data Pair 2
Data Pair 3

Table 11: Features - ETH Port LEDs

On
Blink
Off
On
Off
Proprietary Redline Communications © 2014
Description
Data Pair 2
Data Pair 3
N/C
N/C
Description
Link active - no data flow
Link active - data flow detected
Link not active
100Base-T mode
10-Base-T mode
Description
PoE
+Ve (out)
-Ve (out)
Description
Link active - no data flow
Link active - data flow detected
Link not active
100Base-T mode
10Base-T mode
Page
ETH
Data Pair 2
Data Pair 3
N/C
N/C
19 of 70 December 3, 2014