Assemble Sector Antenna With Tma Amplifier; Figure 37: Assembly: Mounting Tower Amplifier To The Sector Antenna - Redline RDL-3000 Installation Manuallines

RDL-3000 Ellipse TMA Sector Controller Installation Guidelines
6.2

Assemble Sector Antenna with TMA Amplifier

The antenna and amplifier are supplied separately and must be bolted together, cables
attached, and weatherproofing applied before final installation. Locate all required parts
before assembling the unit.

Figure 37: Assembly: Mounting Tower Amplifier to the Sector Antenna

Notes:
1. The RDL-3000 is mounted directly to the antenna.
2. The antenna with attached RDL-3000 system is mounted on a mast using the
supplied mounting kit.
3. All connections must be weatherproofed.
4. Cable orientations are shown for connection purposes only. All cables must be
strapped to the mast to avoid damage.
5. All systems must be properly grounded for personal safety and to protect
equipment. Refer to grounding recommendations in the Ellipse TMA and Edge
Installation Guidelines manuals.
70-00159-02-00 Proprietary Redline Communications © 2014 Page 44 of 59 July 18, 2014