System Access - Proxim Harmony 8550 Manual

System Access

Each time a user opens the Harmony Access Point Management tool and clicks either the
<Configure> or <Reboot> button, the user is prompted to enter a User Name and
Password.
The User Name is "admin". It is case-sensitive and cannot be changed.
The default Password is "proxim".
Follow these steps to change the Password:
1. Open the Harmony Access Point Management tool.
2. Click the <Configure> button.
3. Enter the User Name and current Password.
4. Click the System Access tab.
5. Enter a new Password in the Enter New Web Password field.
Note:
The Password is case-sensitive and cannot exceed 12 characters.
6. Enter the new Password a second time in the Confirm New Web Password field.
7. Click <Submit> for this change to take effect.
8. Reenter the Access Point's IP address in the Web browser's Location or Address
field to reset the Harmony Access Point Management tool.
Note:
If you forget the Access Point's Password, contact Proxim Technical Support
for assistance.
44