Sensor Settings - Grandstream Networks GSC3505 Series User Manual

Brightness Control
Red Light
Green Light
Blue Light
Volume Settings
Call Volume
Ringtone volume
Media volume
TR-069
Enable TR-069
ACS URL
ACS Username
ACS Password
Periodic Inform Enable
Periodic Inform Interval
(s)
Connection Request
Username
Connection Request
Password
Connection Request Port
CPE Cert File
CPE Cert Key

Sensor Settings

Control the intensity of the Red Color in the LED
Control the intensity of the Green Color in the LED
Control the intensity of the Blue Color in the LED
Sets the volume of calls.
Sets the volume of ringtones.
Sets the volume of media.
Sets the device to enable the "CPE WAN Management Protocol" (TR-069). The default setting
is "No".
Note: Reboot the device to make changes take effect.
Specifies URL of TR-069 ACS (e.g, http://acs.test.com), or IP address.
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. Default is "No".
Configures to sends periodic "Inform" packets to ACS based on specified interval. The default
setting is 86400.
Enters username for the ACS to connect to the device.
Enters password for the ACS to connect to the device.
Enters the port for the ACS to connect to the device.
Uploads Cert File for the device to connect to the ACS via SSL.
Uploads Cert Key for the device to connect to the ACS via SSL.
Basic Settings