Ceiling Mount - Grandstream Networks GSC3505 Series User Manual

2. Fix the metal bracket on the wall by expansion screws.
3. Align the position line on device's back cover with the positioning slot.
4. Rotate the device clockwise until it is locked on the right position.
Figure 3: Wall Mount – Step 1
Figure 5: Wall Mount – Step 3

Ceiling Mount

1. Put the ceiling mounting (metal bracket) in the ceiling's center and mark the position of the three screws holes.
2. Drill a round hole with a diameter of 18mm for Ethernet cable. The distance between its center and the highlighted hole
on the plastic bracket should be 35mm.
3. Fix the plastic and metal brackets on the ceiling with flat-head screws and locknuts. Then place and Ethernet cable pass
through the 18mm-round hole.
4. Align the position line on device's back cover with the positioning slot.–––
5. Rotate the device clockwise until it is locked on the right position.
Figure 7: Ceiling Mount – Step 1 & 2
Figure 4: Wall Mount – Step 2
Figure 6: Wall Mount – Step 4
Figure 8: Ceiling Mount – Step 3