Openvpn® Settings - Grandstream Networks GSC3505 Series User Manual

Advanced Settings
Layer 2 QoS 802.1p
Assigns the priority value of the Layer 2 QoS packets for Wi-Fi.
Priority Value (Wi-
The Default value is 0.
Fi)
Configures Wi-Fi country code.
Country Code The default value is "United States of America".
Note: Reboot is requested to take effect.
OpenVPN® Settings
OpenVPN ®
Settings
This enables/disables OpenVPN® functionality, and requires the user to have access to an OpenVPN®
server. The default setting is No.
Enable
OpenVPN®
Note: To use OpenVPN® functionalities, users must enable OpenVPN® and configure all of the settings
related to OpenVPN®, including server address, port, OpenVPN® CA, certificate and key.
Enable
Configures enable/disable the LZO compression. When the LZO Compression is enabled on the
OpenVPN®
OpenVPN® server, you must turn on it at the same time. Otherwise, the network will fail to connect.
Comp-lzo
OpenVPN®
The URL/IP address for the OpenVPN® server.
Server Address
OpenVPN®
The network port for the OpenVPN® server. By default, it is set to 1194.
Port
OpenVPN®
Determines network protocol used for OpenVPN®: UDP or TCP.
Transport
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for authentication purposes. Press
OpenVPN® CA
"Upload" to upload the corresponding file to the device.
OpenVPN®
OpenVPN® Client certificate file (*.crt) required by the OpenVPN® server for authentication purposes.
Client
Press "Upload" to upload the corresponding file to the device.
Certificate
OpenVPN® The OpenVPN® Client key (*.key) required by the OpenVPN® server for authentication purposes. Press
Client Key "Upload" to upload the corresponding file to the device.