Figure 9: Ceiling Mount – Step 4
Anti-theft Installation
After the device is assembled with the metal bracket support on the wall or ceiling, use the anti-detachable screw (M3x15) in
order to prevent theft.
Powering and Connecting GSC3510/GSC3505
The GSC3510/GSC3505 can be powered on using PoE/PoE+ switch or PoE injector using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the GSC3510/GSC3505.
Step 2: Plug the other end into the power over Ethernet (PoE) switch or PoE injector.
Connecting Wiring Seat
GSC3505/GSC3510 support to connect a "Key & LED" or "Normal Key" to the 2-pin port via Wiring Seat using following steps:
Step 1: Take the wiring seat from the install kits.
Step 2: Connect the "Key & LED" or "Normal Key" with the wiring seat (as shown in the figure below)
Note
Figure 11: Anti-theft Installation
Figure 12: Powering GSC3505/GSC3510
Figure 10: Ceiling Mount – Step 5