Authentication Information - Grandstream Networks GSC3505 Series User Manual

Firmware Allows users to choose the firmware upgrade method: TFTP, HTTP, HTTPS or Manual Upload. The
Upgrade Mode default setting is "HTTP".
Firmware Server Sets IP address or domain name of firmware server. The URL of the server that hosts the firmware
Path release. Default is "fm.grandstream.com/gs".
HTTP/HTTPS
Enters the username for the firmware HTTP/HTTPS server.
Username
HTTP/HTTPS
Enters the password for the firmware HTTP/HTTPS server.
Password
Firmware File Checks if firmware file is with matching prefix before downloading it. This field enables user to store
Prefix different versions of firmware files in one directory on the firmware server.
Firmware File Checks if firmware file is with matching postfix before downloading it. This field enables user to store
Postfix different versions of firmware files in one directory on the firmware server.
Firmware Click the "Detect" button to check whether the firmware in the firmware server has an updated
Upgrade version, if so, update immediately.
Config File
It is used to configure the download path and update mode for the configuration file server.
If set to "Yes", the device will set the download path of the configuration file to
Use Grandstream
"fm.grandstream.com/gs" by default and use HTTPS protocol to connect to the server.
GAPS
If set to "No", then users can manually configure the path and update mode for the configuration
file server.
Config Upgrade
Selects provisioning method: TFTP, HTTP or HTTPS. Default setting is "HTTPS".
Via
Config Server Sets IP address or domain name of configuration server. The server hosts a copy of the configuration
Path file to be installed on the device. Default is "fm.grandstream.com/gs".
HTTP/HTTPS
Configures the username for the config HTTP/HTTPS server.
Username
HTTP/HTTPS
Configures the password for the config HTTP/HTTPS server.
Password
Always send
Includes configured username and password in HTTP request before receiving authentication
HTTP Basic
challenge from the server.
Authentication
Default is "No".
Information
Checks if configuration files are with matching prefix before downloading them. This field enables
Config File Prefix
user to store different configuration files in one directory on the provisioning server.
Checks if configuration files are with matching postfix before downloading them. This field enables
Config File Postfix
user to store different configuration files in one directory on the provisioning server.
Sets the device to authenticate configuration file before applying it. When set to "Yes", the
Authenticate Conf
configuration file must include value P1 with phone system's administration password. If it is missed
File
or does not match the password, the device will not apply it. Default setting is "No".