Date Display Format; Security Settings - Grandstream Networks GSC3505 Series User Manual

Determines which format will be used to display the date.
It can be selected from the drop-down list.
Normal (YYYY/M/D)
Date Display
YYYY/MM/DD
Format
MM/DD/YYYY
DD/MM/YYYY
The default setting is MM/DD/YYYY

Security Settings

Web/SSH
Access
Enable SSH Enables/disables SSH access to the device. The default setting is "Yes".
Allow web page Allow web page access, If set to "NO", the Web UI will not be accessible. Please turn it on carefully. The
access setting requires reboot to take effect. Enabled by Default.
SSH Port Customizes the SSH port. By default, SSH uses port 22.
Determines which protocol will be used to access the device 's Web GUI. It can be selected from HTTP
Access Method
and HTTPS. The default setting is HTTP.
Specifies which port to use to access the Web UI. By default, if HTTP, the port number will be 80; if
Port
HTTPS is selected, the port number will be 443.
User Info
Management
Current Admin
Enter current logged-in user's password. This field is case sensitive. The default password is "admin".
Password
New Admin Allows the user to change the admin password. The password field is purposely blank after clicking the
Password "Save" button for security purpose. This field is case sensitive with a maximum length of 32 characters.
Confirm Admin
Enter the new Admin password again to confirm.
Password
New User Allows the administrator to set the password for user-level web GUI access. This field is case sensitive
Password with a maximum length of 32 characters. The default password is "123".
Confirm New
Enter the new User password again to confirm.
User Password
TLS
Minimum TLS
Specifies the minimum TLS version allowed for the connection.
Version