Grandstream Networks GHP6 Series Administration Manual page 28

Handset TX Gain (dB)
Enable HAC
Enable Bootup Tone
LED
LED Brightness: Active
LED Brightness: Idle
TR-069
A TR-069 client is a software application that allows service providers and equipment manufacturers to manage, configure,
and update their customers' network-connected devices remotely.
Parameter
Enable TR-069
ACS URL
TR-069 Username
TR-069 Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request Username
Connection Request Password
Connection Request Port
CPE SSL Certificate
CPE SSL Private Key
Start TR-069 at Random Time
Configures the transmission gain of the handset.
If enabled, the phone will be compatible with nearby hearing aids.
If enabled, the phone will emit a sound effect when it boots up.
Configures the LED brightness when the phone is active. Valid range is 0 to 10 where 0 is off
and 10 is the brightest.
Configures the LED brightness when the phone is idle. Valid range is 0 to 10 where 0 is off and
10 is the brightest.
Enable or disable TR-069
URL of the TR-069 Auto Configuration Servers (e.g., http//acs.mycompany.com, or
IP address).
ACS username for TR-069.
ACS password for TR-069.
Enables periodic inform. If set to "Yes", device will send inform packets to TR-069
Auto Configuration Server.
Configures periodic inform interval to send the inform packets to TR-069 Auto
Configuration Server.
The username for the TR-069 Auto Configuration Server to connect the phone.
The password for the TR-069 Auto Configuration Sever to connect to the phone.
The port for the TR-069 Auto Configuration Server to connect to the phone.
The Cert File for the phone to connect to the TR-069 Auto Configuration Sever via
SSL.
The Cert Key for the phone to connect to the TR-069 Auto Configuration Sever via
SSL
If enabled, TR-069 will send out the first INFORM message to the server on
randomized timing between 1 to 3600 seconds after the phone boots up.
Description