Programmable Keys; Multi-Purpose Keys - Grandstream Networks GHP6 Series Administration Manual

Layer 3 QoS for RTP
Enable DHCP VLAN
Enable Manual VLAN Configuration
Layer 2 QoS 802.1Q/VLAN Tag
Layer 2 QoS 802.1p Priority Value
Maximum Transmission Unit (MTU)
Action URI Support
Action URI Allowed IP List
CSTA Control
SaveSave and ApplyReset
Wi-Fi Settings (Only GHP6x0W and GHP6x1W)
Wi-Fi Function This parameter enables/disables the Wi-Fi function.
Wi-Fi Band Set the type of Wi-Fi band.
Country Code Configures Wi-Fi Country Code
Available Wi-Fi Available Wi-Fi

Programmable Keys

Multi-Purpose Keys

The admin can customize the multi-purpose keys functionality by accessing the web GUI Programmable Keys → Multi-
Purpose Keys. The phone will generate a multi-purpose keys label based on the customization made by the administrator,
which he/she can print and stick on the front side of the phone.
GHP61X
Configures the layer 3 QoS parameter for RTP. This value is used for IP Precendence,
DiffServ, or MPLS.
Configures to enable or disable auto-configure for VLAN settings via DHCP.
Allow phone to keep the VLAN configuration without applying them.
Assigns the VLAN Tag of the Layer 2 QoS packets.
Assigns the priority value of the Layer 2 QoS packets. Valid range is 0 to 7
Configures the MTU in bytes
Remote Control
Configures whether to enable phone to handle action URI request.
List of allowed IP addresses from which the phone receives the action URI.
Configures whether to enable the CSTA Control feature.