Check After Finishing Work; Locking - Komatsu PC15MRX-1 Operation And Maintenance Manual

OPERATION
3. Lower the bucket horizontally until the bottom touches
the ground.
4. Lower the blade to the ground.
5. Set safety lock lever (3) in the LOCK position.

CHECK AFTER FINISHING WORK

Check the engine water temperature(1), engine oil pressure(2),
and fuel level(3) on the machine monitor.

LOCKING

Always lock the following places.
(1) Fuel tank filler port
(2) Engine hood
REMARK
Use the starting switch key to open and close all these places.
MACHINE OPERATIONS AND CONTROLS
3-59