Replace Rubber Shoes - Komatsu PC15MRX-1 Operation And Maintenance Manual

MAINTENANCE PROCEDURE

REPLACE RUBBER SHOES

(Machine equipped with rubber shoe)
Carry out this operation with two workers. The opera-
tor must move the machine in accordance with the
signals from the other worker.
The track tension is checked with the machine raised,
so it is extremely dangerous if the machine comes
down by mistake during the inspection. Stop the
engine and set the safety lock lever to the LOCK posi-
tion to prevent the machine from moving. Never put
any part of your body under the track or track frame
while measuring, and be extremely careful when tak-
ing the measurements.
NOTICE
It is possible to replace rubber shoes with steel shoes, but this makes it necessary to remove and adjust
the idler cushion, so please contact your Komatsu distributor.
Prepare a grease gun
Prepare a steel pipe
4-36
WARNING
MAINTENANCE