Komatsu PC15MRX-1 Operation And Maintenance Manual page 122

TRANSPORTATION
SECURING MACHINE
Load the machine on a level and hard place. Secure a sufficient distance between the road shoulder and
the machine.
NOTICE
To prevent damage to the bucket cylinder during transportation, fit a wooden block at one end of the
bucket cylinder to prevent it from touching the floor.
Load the machine on to a trailer as follows.
1. Lower the brade.
2. Extend the bucket and arm cylinders fully, then lower the
boom slowly.
3. Stop the engine, then remove the key from the starting
switch.
4. Lock the control levers securely with the safety lock lever.
5. Put blocks under both ends of the tracks to prevent the
machine from moving during transportation, and tie the
machine down securely with chains or wire rope of suit-
able strength.
Be particularly careful to fix the machine in position
securely so that it does not slip to the side.
3-68
WARNING
OPERATION