Komatsu PC15MRX-1 Operation And Maintenance Manual page 124

TRANSPORTATION
7. Install shackles to the lifting holes B (2 places) on both
ends of the blade, then install the wire ropes.
8. Install shackles to the lifting holes A of the boom, then
install the wire ropes.
NOTICE
Be sure to use the three brackets.
Do not lift the machine with the boom or the upper
structure swung.
Be careful not to get the hoses caught.
9. When lifting, set the hanging angle of the wire ropes to
30° to 40°.
10. After the machine leaves the ground, stop lifting once.
After the machine is stabilized, lift it up slowly.
3-70
OPERATION