Attachment Guide; Attachment Combinations - Komatsu PC15MRX-1 Operation And Maintenance Manual

ATTACHMENT GUIDE

ATTACHMENT GUIDE
Please read the instruction manual for the attachment and the sections of this manual related to
attachments and options.
When installing any attachment or option, there may be problems with safety, so please contact your
Komatsu distributor before installing.
Installing attachments or options without consulting your Komatsu distributor may not only cause
problems with safety, but may also have an adverse effect on the operation of the machine and the life
of the equipment.
Any injuries, accidents, or damage resulting from the use of unauthorized attachments or options will
not be the responsibility of Komatsu.

ATTACHMENT COMBINATIONS

Depending on the type or combination of work equipment, there is danger that the work equipment may
hit the cab or machine body.
When using unfamiliar work equipment for the first time, check before starting if there is any danger of
interference, and operate with caution.
This is the combination table for buckets that can be installed to the standard arm.
If a long arm is installed, do not pull the bucket fully in towards the machine. It will hit the machine body.
When lowering the boom while digging diagonally, be careful not to let the bucket hit the undercarriage.
Categories of use
For general digging: Digging or loading sand, gravel, clay etc.
For light duty digging: Digging or loading dry, uncaked earth and sand, mud etc.
For loading work: Loading dry, loose earth and sand
Judgement
: Can be used
: Can be used only for light duty work
: Cannot be used
Standard bucket
Narrow bucket
Narrow bucket
6-6
Capacity
Bucket width
mm (in)
m 3 (cu.yd)
0.044 (0.06) 500 (19.69)
0.040 (0.05) 250 (9.84)
0.028 (0.04) 350 (13.78)
WARNING
WARNING
Application
For general digging
For narrow digging
For narrow digging
ATTACHMENTS AND OPTIONS
Standard arm Long arm