Komatsu PC15MRX-1 Operation And Maintenance Manual page 78

MACHINE OPERATIONS AND CONTROLS
CHECK FUEL LEVEL, ADD FUEL
Be careful not to let the fuel overflow when adding fuel. This may cause a fire.
Wipe up all fuel that is spilled. If there is sand where the fuel is spilled, remove all the sand. Fuel is flam-
mable and dangerous. Keep it away from any flame.
1. Insert the key in starting switch (1), and turn in to the ON
position to light up the monitor.
2. Check the remaining fuel level with fuel gauge (2). If the
level is low, open the cover on the right side, and watch
level gauge (G) while adding fuel through fuel filler port
(F).
Fuel capacity : 19 liters (5.02 US gal.)
3. After adding fuel, tighten the cap securely.
REMARK
If breather hole on the cap is clogged, the pressure in the tank
will drop and fuel will not flow.
Clean the hole from time to time.
3-24
WARNING
OPERATION