OPERATION
EXPLANATION OF COMPONENTS
COVER WITH LOCK
Locks are installed to the cover on the right side of the machine, the operator's cab, engine hood, and tool box.
Use the starting switch key to lock or unlock these places.
Opening and Closing Covers with Lock
Insert the key as far as it will go to the shoulder. If the key is
turned before it is inserted all the way, it may break.
Opening the Cover
1. Insert the key into the cap.
2. Turn the key clockwise and open the cover.
Locking the Cover
1. Turn the cap into place.
2. Turn the key counterclockwise and take the key out.
OPERATION MANUAL STORAGE
There is a box provided in the rear of the operator's seat to
keep the Operation and Maintenance Manual.
Keep the operation manual in this box so that you can read it
when you need it.
3-19