Komatsu PC15MRX-1 Operation And Maintenance Manual page 68

EXPLANATION OF COMPONENTS
TRAVEL LEVERS
If the track frame is facing the rear, the direction of travel
operations will be reversed.
When operating the travel levers, check if the track frame
is facing the front or the rear.
(If sprocket (A) is at the rear, the track frame is facing the
front.)
Use this lever (6) to driver the machine.
(a) FORWARD: The lever is pushed forward
(b) REVERSE: The lever is pulled back
N (Neutral): The machine stops
REMARK
If the lever is shifted to the advance or reverse position from
the neutral position, the alarm sounds to warm that the
machine is starting to advance.
PEDAL LOCK
(For boom swing contol pedal)
When boom swing operation is not required, lock the
boom with the pedal lock. If the operation pedal is acci-
dentally pressed while it is not lock, a serious accident or
injury.
This pedal (7) is used to lock the boom swing pedal.
The pedal is locked by fitting the plate over the pedal.
3-14
WARNING
WARNING
OPERATION