MAINTENANCE
CLEAN FUEL FILTER
(With water separator)
Prepare a filter wrench for fuel filter.
Prepare a container to catch drain fuel.
1.
Open the engine hood, and set handle to the LOCK posi-
tion.
See "ENGINE HOOD (PAGE 3-17)".
2.
Using a filter wrench, loosen ring (2), remove case (3),
then throw out the water inside.
Be careful not to lose red ring (4) inside the case.
3.
Wash element (5) and the inside of the case with diesel
fuel.
4.
Set case (3) in position, then tighten ring (2) to install.
5.
Set handle (1) to the OPEN position.
MAINTENANCE PROCEDURE
4-29