Table of Contents
Advertisement
You can find out the interval that your Osprey is using by selecting the Settings, About,
Configuration option (see page 30).
•
The Inmarsat modem in the Osprey is turned on continuously to allow faster message
delivery and receipt.
Keep in mind that Alert mode uses considerably more battery power than normal operation, reducing
the battery life.
Note: Objects pressing hard against the rubber cover may cause accidental activation of Alert mode.
Take measures to avoid accidental operation.
Activating Alert Mode
The procedure for activating Alert mode is as follows:
1.
Lift the protective cover from the Alert key (
The following screen is displayed:
2.
Select OK.
3.
Replace the protective cover securely over the Alert key.
Note: Alert mode can be activated when the Osprey is off or the keypad is locked.
Canceling Alert Mode
To cancel Alert Mode, switch off the Osprey then switch it on again. The following reminder is
displayed:
Changing the Osprey's Settings
Selecting Settings in the Home page allows you to access the following options:
Lock Keypad: Locks the keypad (see page 14).
This document contains information that is proprietary and confidential to EMS Global Tracking (one or more of the following: EMS Global Tracking Ltd and EMS Technologies
Canada, Ltd), and is supplied on the express condition that it is not to be used for any purpose other than the purpose for which it was issued, nor is it to be copied or
communicated in whole or in part, to any third party other than the recipient organization, without the prior written permission of EMS Global Tracking.
MAN-0053 Issue 3
Osprey Personal Tracker
Operator Manual
© 2010 EMS Global Tracking Ltd, EMS Technologies Canada Ltd.
) then press and hold the key for 2 seconds.
Attempt to maintain a good sky view when in this
mode.
The Alert mode icon flashes until ViewPoint
acknowledges Alert mode:
Operating
the Osprey
29 of 36
Advertisement
Table of Contents
