ETC Installation Guide
ColorSource Spot jr v2.0/v3.0/v4.0
FCC Compliance
ColorSource Spot jr
(For any FCC matters):
Electronic Theatre Controls, Inc.
3031 Pleasant View Road
Middleton, WI 53562
+1 (608) 831-4116
etcconnect.com
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received;
including interference that may cause undesired operation. Visit
etcconnect.com/products
information including FCC compliance.
Note:
the limits for a Class A digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. Any modifications or
changes to this product not expressly approved by Electronic
Theatre Controls, Inc. could void the user's authority to operate
the product. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at their own expense.
ColorSource Spot jr
for current and complete compliance
This equipment has been tested and found to comply with
Page 15 of 16
ETC
Need help?
Do you have a question about the ColorSource Spot jr v2.0 and is the answer not in the manual?