Set The Dmx Address - ETC ColorSource Spot jr v2.0 Installation Manual

ETC Installation Guide
ColorSource Spot jr v2.0/v3.0/v4.0
Adjust the Zoom and Focus the Fixture
Use the Zoom knob to adjust the 25°–50° zoom, and use the Focus knob
to adjust the field. Because the Zoom knob and Focus knob are easiest to
adjust when on the bottom of the fixture, avoid mounting the
ColorSourceSpot jr in an orientation where the knobs are on top.
attaches to front
Accessories
You can use standard accessories, such as a gobo, in the accessory slot
(see image above). You can also attach an accessory holder to the front of
the fixture (order part number 7416K1001). After you attach the
accessory holder, you can use it to secure accessories such as a top hat or
half hat. See the ColorSource Spot jr datasheet at
accessory information.
You can attach a ColorSource Relay to the yoke. See
more information about ColorSource Relay.

Set the DMX Address

1. Press any button to wake the display. The display shows the DMX
address.
2. Use the Up and Down buttons to select the DMX address for the
fixture.
You can also use RDM for DMX addressing. See
ColorSource Spot jr
Accessory holder
(optional)
Zoom Focus
knob knob
Page 6 of 16
Accessory slot
Shutters
(x4)
etcconnect.com
etcconnect.com
RDM Values on page 14
for
for
.
ETC