Appendix E Compliance; Fcc Compliance; Eu Declaration Of Conformity - ETC ArcLamp System Installation Manual

Appendix E
Compliance
For current and complete compliance information, view the product datasheets at
etcconnect.com/Products/Lighting-Fixtures/ArcLamp/Documentation.aspx.
FCC Compliance
Wireless-capable ArcLamp products comply with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause
undesired operation.
ArcLamp wireless products contain FCC ID for US: TYOJN5168M5 and Industry Canada (IC) ID:
IC 7438A CYO5168M5.
Note:
with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference
at his own expense.
EU Declaration of Conformity
Wireless-capable ArcLamp products comply with the essential requirements of the RED Directive
of the European Union (2014/53/UE).
Wireless-capable ArcLamp products also comply with the following standards:
ETSI EN 301 489-17 V2.1.1 (2009), ETSI EN 301 489-1 V2.2.0 (2011), Draft ETSI EN 301 489-17
V3.2.0 (2017), Draft EN 301 489-1 V3.2.0 (2017), ETSI EN 300 328 V1.8.1 (2012), ETSI EN 300
328 V1.9.1 (2015), ETSI EN 300 328 V2.1.1 (2016)
Compliance
Wireless-capable ArcLamp products have been tested and found to comply
65