Table of Contents
Advertisement
6. Enter the Passcode shown on the Display into the input field, then tap Pair.
7. Once you smartphone is successfully paired, the Device Status screen will be displayed. This
can take a few minutes.
SUBSEQUENT CONNECTIONS
Once a smartphone has been paired with the RedVision
Display, it will automatically reconnect
®
when the RedVision
App is opened and that Display is selected — Tap the Menu icon ( ) at the
®
top right, then select the Display from the list of Devices.
PAIR MULTIPLE SMARTPHONES
The RedVision
Display can be paired to multiple smartphones, however it can only be
®
monitored/controlled by one smartphone at a time. When the RedVision
App is minimised on
®
one smartphone, the RedVision
App can be opened on another smartphone and will connect
®
automatically if it has previously been paired.
To pair another smartphone, repeat the steps
'Pair the RedVision® App to the
Display' (page 39).
40 | System Testing & Operation
Advertisement
Table of Contents
Need help?
Do you have a question about the TVMS Rogue and is the answer not in the manual?