Redarc TVMS Rogue Manual page 37

END-USER LOCKOUT
TVMS Rogue allows you to add an Installer PIN (personal identification number) to prevent
end-users from changing the Configuration of their RedVision
hazards if the system is reconfigured in an unsafe way by persons who do not fully understand the
system requirements.
IMPORTANT: By adding an Installer PIN, the saved Configuration cannot be edited without
entering a correct the PIN. DO NOT forget the PIN.
ADD AN INSTALLER PIN:
1. Open the RedVision
2. From the Choose System screen, tap Open Configuration
you want to add an installer PIN to.
3. Tap the gear icon (
pop-up list.
4. Type a 4 to 8 digit PIN into the New PIN field, then retype it in the Confirm new PIN field. Tap
Add.
5. The pin will now have to be input in order to make any changes to the locked configuration.
REMOVE THE INSTALLER PIN:
1. Open the RedVision
2. From the Choose System screen, tap Open Configuration
you want to remove the Installer PIN from.
3. Tap the gear icon (
the pop-up list.
4. Type the PIN into the Current PIN field, then tap Remove.
Configurator App.
®
) at the top right of the screen, then select Add Installer PIN from the
Configurator App.
®
) at the top right of the screen, then select Remove Installer PIN from
system. This is to avoid safety
®
then select the configuration
then select the configuration
System Configuration | 37