Printing Data Saved In The Printer; Specifying The Job Box From A Computer And Storing The Job - Kyocera ECOSYS M5526cdn Operation Manual

Printing from PC > Printing Data Saved in the Printer

Printing Data Saved in the Printer

You can save the print job into the Job Box of this device and print it as necessary.
To use the Stored Job Box and the Quick Copy Box, an SD/SDHC memory card must be installed in the device.
To use the Private Print Box and the Proof and Hold Box, an expansion memory or SD/SDHC memory card must be
installed in the device.
IMPORTANT
Unencrypted data is saved on the SD/SDHC memory card.
Exercise caution when saving sensitive documents.
NOTE
• To use expansion memory, [RAM Disk Setting] must be [On].
RAM Disk Setting (page 8-37)
• If you are using an SD/SDHC memory card to use a job box, set [RAM Disk Setting] to [Off].
If you configure settings in the [Job] tab of the printer driver and then print, the print job will be saved in the Job Box
(memory) and printing can be executed at the machine.
Follow the work flow below when using Job Box.
Specifying the Job Box from a computer and sending the print job.
Using the operation panel to specify a file within a Box and printing it.
You can print the documents from the following boxes.
Printing Documents from Private Print Box (page 4-12)
Printing Document from Stored Job Box (page 4-13)
Printing Document from Quick Copy Box (page 4-14)
Printing Document from Proof and Hold Box (page 4-15)
Specifying the Job Box from a Computer and Storing
the Job
1
2
3
4
Click [File] and select [Print] in the application.
The Print dialog box displays.
Select the machine from the "Name" menu.
Click the [Properties] button.
The Properties dialog box displays.
Click the [Job] tab and select the [Job storage (e-MPS)] check
box to set the function.
NOTE
For information on how to use the printer driver software, refer to the following:
Printer Driver User Guide
(page 4-11)
4-11