2-7-3.Control Panel Button Function - Minolta QMS PageWorks/Pro 1100 Service Manual

2-7-3. Control Panel Button Function
The panel button can be used to perform various operations
according to the status of the printer.
• Reset the counter
• Job cancel
• Print configuration page
• Form feed
Function
Reset the counter
Job Cancel
Print
Configuration
Page
Form Feed
Explanation
Use the following procedure whenever you want to reset
the counter.
1. Turn off the printer.
2. While holding down the panel button, turn on the printer.
3. Keep the panel button held down, and the Ready indica-
tor will start to blink. After the Ready indicator has
blinked for about 5 seconds, release the panel button.
This should cause all the indicators to start to blink.
4. After all the indicators blink, the printer enters the
counter reset mode.
P .20
Use the following procedure whenever you want to cancel
the current job.
1. Hold down the panel button for more than 5 seconds.
2. After all the indicators are lit, release the panel button to
cancel the print job.
Use the following procedure whenever you want to
configuration for printer.
• Press the panel button while printer is idle without any
errors and job requests.
P .21
Use the following procedure to resume printing after an
error occurs dues to any one of the following causes.
Print job is too complex.
• Memory overflow
• Almost out of paper
• Wrong size paper was fed into the printer.
Press the panel button to perform a form feed.
19