Minolta QMS PageWorks/Pro 1100 Service Manual page 75

9. Remove the Roller Assy. (2 screws)
10. Remove the four Fusing Paper Separators.
11. Remove the Thermistor (TH1). (1 screw)
NOTE: Route the harness along the bottom of the Fusing unit when
attaching the Thermistor, as shown in Fig.1.
12. Remove the Thermostat (TS1). (2 screw)
3704
Roller Assy.
Thermostat
Thermistor
Roller Assy.
Paper separator (4 pcs.)
4121s061
Fig. 1. Bottom of the Fusing Unit
1 2
Harness
4121s076
4121s077
61