Control Module Specification; Control Module Front Interface - Pylontech PowerCube-H1-V2 Operation Manual

2.5. Control Module Specification
No.
1
Related Product
2 Controller Working Voltage
3 System Operation Voltage(Vdc)
4 Charge Current(Max.)(A)
5 Discharge Voltage(Vdc)
6 Discharge Current(Max.)(A)
7
Self-consumption Power(W)
8 Dimension(W*D*H,mm)
9 Communication
10 Protection Class
11 Weight(kg)
12
Operation Life(Years)
13
Operation Temperature(
14 Storage Temperature(
15 Product Certificate
* Maximum current is the values only for controller, the current value of the system is based on
the battery module

2.5.1. Control Module Front Interface

Power Terminal+ To battery
Power Terminal- To battery
Power Terminal B+/B-
To connect battery module power cables in series.
Power Switch
Switch the battery system's (control module and high voltage DC power) ON/OFF.
Caution: When the breaker is tripped off because of over current or short circuit, must wait after
30 minutes to turn on it again, otherwise may cause the breaker damage.
Product Type
℃
)
℃
)
Power Switch Dry Contact
Reset
ADD External Power Terminal - To PCS
Internal CAN A&B RS232/External CAN
SC1000-100S-V2
10 / 42
SC1000-100S-V2
H48050/H48074
200~1000Vdc
200~1000
80
200~1000
80
8
442*390*132
Modbus RTU\CAN\LAN
IP20
9
15+
-20~65
-40~80
TUV, CE
External Power Terminal + To PCS
Linkport to BAT
LAN
WIFI
Start Button
DC IN
STATUS
SOC
USB