Screen Display; Cleaning - Volvo Penta D13 Series Operator's Manual

Optional
60
Manual control using control buttons
Manual control of the interceptors is performed using
the control lever buttons and the buttons at the back of
the control.
A All interceptors are trimmed upward
simultaneously. The bow is raised.
B All interceptors are trimmed downward
simultaneously. The bow is lowered.
C Port and starboard interceptors are trimmed
upward individually. Used to correct heel.
D Port and starboard interceptors are trimmed
downward individually. Used to correct heel.
If both the port and starboard buttons at the back of the
control are pressed at once all interceptors are
trimmed in the same way as when using the control
lever button.
In installations with four interceptors, the interceptors
are trimmed in port and starboard pairs.

Screen Display

Interceptor blade position, i.e. how far the blades are
extended, can be presented in one of the EVC system
displays. The display will also indicate if the system is
in auto or manual mode.
In installations with four interceptors, the interceptors
are presented in port and starboard pairs.

Cleaning

The system automatically performs self cleaning by
extending and retracting the blades once every 24
hours to prevent fouling of the interceptor blades. Self
cleaning is performed whether or not the boat is in use.
During prolonged inactivity, e.g. winter lay-ups, self
cleaning can be switched off by turning off the circuit
breaker or disconnecting power.
47708638 09-2016 © AB VOLVO PENTA