Volvo Penta D13 Series Operator's Manual page 134

Calibration and Settings
1. Move control to neutral. 2. Turn the ignition on.
Vessel Type
e-KEY Management
ACP Mode Normal
Speed Factor 115
Fuel Tank
Gauge Ranges
5. e-Key management.
Select Add e-Key.
Name
Delete e-Key
e-Key 1
e-Key
2
Add e-Key
e-Key
3
Identify e-Key
My Vessel
Other vessels
9. Settings Menu:
• Delete key(s)
• Identify e-Key
Hold the new e-Key in
front of the Start/Stop
panel.
132
IGNITION IGNITION
START/STOP START/STOP
6. Hold the new e-Key in
front of the Start/Stop
panel. Confirm with OK.
IGNITION IGNITION
START/STOP START/STOP
10. NOTICE! A valid e-
Key is required as
authorization for future
e-Key Management.
Add e-Key, Glass Cockpit
NOTICE! The ignition must be on and engine(s)
stopped.
Up to four e-Keys can be added.
Home
Engage Engage Settings
Waypoints Waypoints Info Info Settings Settings Meny Meny Mark Mark SOS SOS
GARMIN
3. Main Menu > Settings.
Name
e-Key 1 Delete e-Key
Add e-Key
Identify e-Key
My Vessel
Other vessels
7. e-Key added.
Remaining available
locations for e-Key in
display. Further options
appear in right side
menu.
11. Ignition must be
turned off for at least 15
seconds to confirm the
calibration.
47708638 09-2016 © AB VOLVO PENTA
System
Preferences
Communications
Alarms
My Vessel
Other vessels
4. My Vessel.
8. Repeat step(s) 6
for additional e-Keys.