Starting The Engine - Volvo Penta D13 Series Operator's Manual

Starting
IGNITION
START/STOP
P0016670
62
IGNITION
START/STOP

Starting the Engine

Shifting and adjusting speed is only possible at an
active station. On a boat with one station, the station
is always active.
The main station is automatically activated when the
EVC-system is unlocked with the e- Key panel.
On a boat with two or more stations, the engine(s) can
be started from another station with a start/stop panel
– if the engine(s) are turned off. The station
automatically becomes active when the engine(s)
is/are started.
If a helm station is locked, the engines can only be
started and stopped from this station.
Put the Gear in Neutral
Put the drive in neutral by moving the control lever(s)
to neutral (N) at all stations.
Turn the Ignition On
Use the key or the e-key panel to turn the ignition on.
Using the Key
Turn the starter key to position I to switch the ignition
on.
Using the e-key Panel
Press the IGNITION button on the e-key panel to
switch the ignition on.
A green light in the IGNITION button indicates that the
ignition is on.
Check the Instruments
If a fault is registered it will be shown in the information
display. See the chapter entitled Fault Handling for
further information and recommended actions.
47708638 09-2016 © AB VOLVO PENTA