Table of Contents
Advertisement
Instruments and Controls
P0002062
Start
When the DCU panel is started, the "Engine Data" menu is displayed; press "ESC" to come to the main menu.
1
LED display
2
START. Starts the engine
3
SPEED - . Reduces engine rpm
4
SPEED +. Increases engine rpm
5
STOP. Stops the engine
47711210 01-2019 © AB VOLVO PENTA
2
1
3
Display Control Unit
The DCU control panel is available as an optional
accessory for the EMS (Engine Management System)
electronic control system.
The DCU is a digital instrument panel which
communicates with the engine control unit. The DCU
has several functions, such as engine control,
monitoring, diagnostics, and parameter setting.
The menus in the DCU system can be used to check,
and in some cases to set, a number of different
functions in the EMS system.
NOTICE! Settings and what engine data that appears
in the display may vary depending on installation and
engine model.
NOTICE! The menus and illustrations shown here are
the English version. The language can be changed,
however; refer to the Setup menu.
5
4
6
ON/OFF. Starts and stops the system
7
Scroll downwards in menus
8
SEL. Selects in menus
9
Scroll upwards in menus
10 ESC. Return to previous menu selection
8
10
9
7
6
29
Advertisement
Table of Contents
