Volvo Penta D13 Series Operator's Manual page 89

1
4
P 00 22617
47708638 09-2016 © AB VOLVO PENTA
2
3
5
1 Unscrew and remove the plug (1). Disconnect the
cable by pressing down the lock (2) and at the same
time wiggle the connector in a forward position.
2 Connect the switch (3) and fit the crank tool (4).
3 Press down the switch button (5) and keep it
pressed while carefully turning the crank tool.
IMPORTANT:
Do not force the crank tool beyond the end position,
it could damage the Electrical Rudder Actuator.
NOTICE! Do not use the crank tool while rampage.
In Case of Emergency
87