Volvo Penta D13 Series Operator's Manual page 27

Instruments and Controls
Neutral Beep
Enable or disable the signal indicating when the control
is in neutral position.
Info Beep
Enable or disable the signal confirming function
activation and deactivation.
Info Beep Level
Set the volume of the Info Beep.
Trip Reset
Reset all trip computer data.
Depth Alarm
Set the depth alarm function. Refer to Depth
Alarm, page 124 for information on how to turn the
function on or off and set the alarm limits.
Display Contrast
Set the display contrast for all displays.
Display Type
Define for which engines information shall be
displayed.
Units
Set the unit settings for the system (metric, US or
Imperial).
Language
Set the system language.
Speed Factor
If the speedometer is showing incorrect values, it is
possible to correct this by adjusting the Speed
Factor.
Refer to Speed Factor, page 129 for more information.
EVC Information
Shows information about components, software, and
functions. Installed functions are check marked.
47708638 09-2016 © AB VOLVO PENTA 25