Beckhoff KL6904 Operating Instructions Manual page 47

Twinsafe logic terminal with 4 fail-safe outputs

Hide thumbs Also See for KL6904:

Table of Contents

Operation

Fig. 34: Set connection

If several connections are to be established, a unique ID must be set for each Publisher variable.

Fig. 35: Set ID

This ID must also be set on the partner device, i.e. the Subscriber.

The network variables can now be used in the project. The inputs are shown under TwinSAFE Input, the

outputs under TwinSAFE Output.

KL6904

Version: 3.0.0

Table of Contents

Kl2904 Kl1904