Deleting A Power-On Password - Epson Equity 386SX User Manual

WARNING
Be sure to remember the new power-on password you
enter or write it down and keep it in a safe place. If you
cannot remember the password you enter now, you will
not be able to access your computer the next time you
turn it on.
Press
3. Enter.
computer loads MS-DOS.
To access the computer the next time you turn it on or reset it,
you must enter the new power-on password.

Deleting a Power-on Password

To delete your power-on password, follow these steps:
1. If you do not have a hard disk, insert your Startup diskette
in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current power-on password followed by a forward slash.
For example, if your password is 123, type:
1 2 3 /
Press
3.
the computer loads MS-DOS.
The next time you turn on or reset the computer, it does not
request a password and loads MS-DOS immediately.
Using the Equity 386SX
3-4
A happy face character appears and then the
A happy face character appears and then
Enter.