The program now allows you to edit the defective track table:
Cylinder Head
nnn
nn
Defective Track Table:
Modify defective track table ? (Y/N)
At the bottom of the table is this prompt:
Modify defective track table ? (Y/N)
Select
N
section and go on to "Formatting the Disk" on page C-9.
To add bad tracks to the defective track table, see the section
below.
Modifying the Defective Track Table
If you select
at the bottom of the table:
Defective Track Table : Move box cursor to desired track with cursor key
A = Add track, C = Change track, D = Delete track, F = Finish editing
Enter corm-and :
To add a bad track, follow these steps:
1. Press A. You see this prompt:
Enter cylinder number (1 -nnnn):
Cylinder Head
to leave the table as it is. Then skip the following
Y
to modify the table, you see the following options
Physically Formatting a Hard Disk
Cylinder Head
Cylinder
Cylinder
Head
Head
C-7