Disk Change Check - Epson Apex 20020, 20040 User Manual

The computer spins the diskette for a few seconds and then
displays a message like this:
The disk rotation, speed is now
The diskette continues to spin and the message listing the
rotation speed is updated every few seconds. To stop the test,
press any key; the program returns to the menu.
If you try to perform a speed test without inserting a diskette, or
if a read error occurs, you see this message and prompt:
Disk is defective or not installed properly.
Press ENTER to return to the menu.

Disk Change Check

This check tests the ability of a drive to detect that a diskette
has been inserted or removed. Disk changes cannot be detected
by a 360KB diskette drive.
Select option 5 from the menu to start this test. First the
program checks the selected drive type; if the drive is a 360KB
drive, you see these messages:
Drive d is a
DISK CHANGE is not allowed with this type of
drive.
Press ENTER to return to the menu.
When you run the test for a 1.2MB, 720KB, or 1.44MB drive,
you see this prompt:
Remove the disk from drive
Release the disk drive latch, and remove the diskette. You see:
Re-insert the disk into drive
drive.
360KB
360.5
rpm.
d.
d.