Stx And Stx Sc How To Sheet - Mazak STX SC L PLUS CONTROL Training Manual

STX and STX SC How to Sheet

To start a new program:
1. Press the D Menu
2. Press program
3. Press program again
4. Enter a number from 1-9999
5. Press Input
If the alarm "program already exists" occurs, press reset, and clear and return to step 4. Be sure not to
choose the same number.
To edit or view a program:
1. Press the D menu
2. Press program
3. Press edit
4. Enter the work number of the program desired.
5. Press Input.
6. If the alarm occurs, press reset, and clear, and return to step 4. Be sure to type in the correct
number.
To graph a program:
1. Press the D menu
2. Press auto.
3. Enter the work number of the program desired.
4. Press Input.
5. Press graphic.
6. Press the M menu to verify that simulation is highlighted. If it is not, press simulation and input.
7. Press cycle start.
85