Table of Contents
Advertisement
Summary of the UK declaration of conformity UKD2021-00817
This declaration of conformity is issued under the sole responsibility of the manufacturer, Renishaw plc.
The object of the declaration is identified below: -
Product name:
TONiC Functional Safety (FS) encoder system
Description:
Revision of TONiC, to comply with the requirements of Functional Safety.
Part number:
Valid from:
T3xxx*
2AHF37
The object of the declaration described above is in conformity with all relevant UK Statutory Instruments (and their amendments): -
S.I. 2008 No. 1597
Supply of Machinery (Safety) Regulations 2008
S.I. 2016 No. 1091
Electromagnetic Compatibility Regulations 2016
S.I. 2012 No. 3032
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 - RoHS
and complies with the following technical standards: -
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 13849-1:2015
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015
EN ISO 13849-2:2012
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
EN 62471:2008
Photobiological safety of lamps and lamp systems
EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
For the full declaration of conformity UKD2021-00817 see www.renishaw.com/productcompliance.
Original instructions
Description:
TONiC FS linear readhead
www.renishaw.com
19
Advertisement
Table of Contents
