Preparing To Install The Contivity 1740; Figure 1 Front View Of The Contivity 1740 - Nortel Contivity 1740 Installing
Hide thumbs
Also See for Contivity 1740:
- Install manual (218 pages) ,
- Installing (158 pages) ,
- Installing manual (94 pages)
Table of Contents
Advertisement
20 Chapter 1 Installing the Contivity 1740 chassis
Figure 1
Figure 1 Front view of the Contivity 1740
The Contivity 1740 chassis provides the following:
•
One 10/100 Ethernet LAN port on the base system
•
One serial port for out-of-band management of the Contivity 1740
•
Four expansion PCI slots that can contain interface cards and one hardware
encryption accelerator card
•
One 10/100 Ethernet interface card installed in PCI slot 4 (500-tunnel model)
•
128 MB memory upgradable to 256 MB total
Preparing to install the Contivity 1740
Before you begin the installation, verify that:
•
Your shipment is complete and undamaged.
•
You have the cables, tools, and other equipment that you need.
•
Your installation site meets the physical, electrical, and environmental
requirements.
The sections that follow provide information to help you prepare for installation.
317086-B Rev 00
shows the front view of the Contivity 1740.
Alert/Fail
Boot/Ready
CS260001C
Advertisement
Table of Contents
