Figure 18 Ip Address Configuration Utility Dialog Box - Nortel Contivity 1740 Installing

46 Chapter 3 Configuring the management IP interface
When the IP address configuration utility finds an unconfigured gateway, it
displays a dialog box where you assign the IP address, subnet mask, and
default gateway

Figure 18 IP address configuration utility dialog box

The utility automatically displays the serial number of the first unconfigured
gateway in the dialog box.
4
Assign an appropriate management IP address and subnet mask to the
Contivity 1740.
The default gateway address is optional; you can configure it later.
5 Click on Apply to configure the management IP address, subnet mask, and, if
specified, the default gateway on the Contivity 1740.
6
Click on Close.
The IP configuration utility dialog box closes.
7
Go to
Contivity 1740 from a Web browser.
For detailed information about configuring and managing the Contivity 1740,
refer to the documentation on the Contivity software CD.
317086-B Rev 00
(Figure 18).
"Testing the configuration" on page 51 to verify that you can access the