Running The Ip Address Configuration Utility; Figure 17 Icon For The Ip Address Configuration Utility - Nortel Contivity 1740 Installing

• Located on the same subnet as the Contivity 1740 to be configured
• Operational network connection
• CD-ROM drive
To test the TCP/IP stack, send a ping command to any host.

Running the IP address configuration utility

The IP address configuration utility searches for serial numbers of unconfigured
gateways and prompts you to enter the management IP address, subnet mask, and
default gateway (optional).
The ExtNetIP.exe program on the Contivity software CD starts the IP address
configuration utility. You can copy the utility to your hard disk and execute it from
there, or you can execute it from the CD drive.
To run the IP address configuration utility:
1
Insert the Contivity software CD into the CD-ROM drive.
2
Locate the Tools folder and then locate the ExtNetIP.exe file.
If you want, copy the file to the hard drive on your system.
3
Double-click on the ExtNetIP.exe icon

Figure 17 Icon for the IP address configuration utility

:
Chapter 3 Configuring the management IP interface 45
Note: If your environment does not match these requirements, you can
use the serial interface to configure the management IP address (see
"Using the serial interface" on page
Note: The IP address configuration utility has a Help file called
ExtNetIP.hlp that you can display and copy to the hard drive.
47).
(Figure 17).
Installing the Contivity 1740