Good Read Led Duration - Newland NLS-HR20-BT User Manual

Good Read LED Duration

This parameter sets the amount of time that the Good Read LED to remain on following a good read. It is programmable in
1ms increments from 1ms to 2,000ms.
** Short (20ms)
Long (220ms)
Custom (1 - 2,000ms)
Set the Good Read LED duration to 800ms:
1. Scan the Enter Setup barcode.
2. Scan the Custombarcode.
3. Scan the numeric barcodes "8", "0" and "0" from the "Digit Barcodes" section inAppendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section inAppendix.
5. Scan the Exit Setup barcode.
11
Enter Setup
Medium (120ms)
Prolonged (320ms)
** Exit Setup