Newland NLS-HR20-BT User Manual page 221

Enter Setup
32 is the hex value for 2 (character in the string to be replaced)
33 is the hex value for 3 (character in the string to be replaced)
03 is the length of XYZ
58595A is the hex value for XYZ
F1 is the "Send all characters"command
00 is the hex value for a NUL
The data is output as: 1XYZ4AbcXYZR0123U
EF Insert a delay
Syntax＝EFnnnn (nnnn: The delay in 5ms increments, up to 9999ms)
Inserts a delay of up to 49,995 milliseconds (in multiples of 5), starting from the current cursor position. This command can
only be used with USB HID Keyboard.
th th
EF Example: Insert a delay of 1s after the 5 and 7 character
Send the first 5 characters in a barcode, wait for 1s, then send the rest of the barcode data.
Command string: F20500EF0200F20200EF0200F100
F2 is the "Send a number of characters" command
05 is the number of characters to send (start output from the current cursor)
00 is the hex value for a Null character
EF is the "Insert a delay" command
0200 is the delay value (5msX200=1000ms=1s)
E9 is the "Send all but the last characters" command
00 is the hex value for a Null character
EF is the "Insert a delay" command
0200 is the delay value (5msX200=1000ms=1s)
The data is output as 12345{1s delay}67{1sdelay}890ABCDEFGHIJ
208
** Exit Setup