Enter Setup
Good Read LED Duration
This parameter sets the amount of time the Good Read LED remains on following a good read.
** Short (20ms)
Long (220ms)
Custom (1 - 2,500ms)
Set the Good Read LED duration to 800ms:
1. Scan the Enter Setup barcode.
2. Scan the Custom barcode.
3. Scan the numeric barcodes "8", "0" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
** Exit Setup
Medium (120ms)
Prolonged (320ms)
18