Newland NLS-HR20-BT User Manual page 141

Enter Setup
Set Length Range for Code 93
The scanner can be configured to only decode Code 93 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
Ifminimumlengthissettobegreaterthanmaximumlength,thescanneronlydecodesCode93barcodes
witheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,onlyCode93 barcodes
with that length are to bedecoded.
Set the scanner to decode Code 93 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setupbarcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8" from the "Digit Barcodes" section inAppendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section inAppendix.
5. Scan the Set the Maximum Lengthbarcode.
6. Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section inAppendix.
7. Scan the Save barcode from the "Save/Cancel Barcodes" section inAppendix.
8. Scan the Exit Setupbarcode.
** Exit Setup
Set the Maximum Length (Default: 48)
128