Newland NLS-HR20-BT User Manual page 174

Set Length Range for PDF417
The scanner can be configured to only decode PDF417 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
Minimum length is not allowed to be greater than maximum length. If you only want to read PDF417
barcodes with a specific length, set both minimum and maximum lengths to be that desired length.
Set the scanner to decode PDF417 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setupbarcode.
2. Scan the Set the Minimum Lengthbarcode.
3. Scan the numeric barcode "8" from the "Digit Barcodes" section inAppendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section inAppendix.
5. Scan the Set the Maximum Lengthbarcode.
6. Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section inAppendix.
7. Scan the Save barcode from the "Save/Cancel Barcodes" section inAppendix.
8. Scan the Exit Setupbarcode.
161
Enter Setup
Set the Maximum Length (Default: 2710)
** Exit Setup